After the initial set-up, after the camera is working, do I still need to have a PC on the same network to manage the camera?
Initially, you do. However, you wouldn't need to keep the PC on the same network after it's configured and running. All that's required is the network connection and router.
Are your video signals for Wi-Fi cameras secure?
Access to the camera's video stream is password-protected. On top of that, the video is a digital feed on your wireless network, so whatever encryption you have configured for that will be provided as well.
Are your Wi-Fi security cameras compatible with Mac?
Yes, with the use of http://www.evological.com/evocam.html, a third-party software. However, it does not support audio.
Can I download the software for your Wi-Fi cameras?
Yes, forward an email to sales@knowyournanny.com, and we will send the software.
Can wireless systems have interference?
There are two kinds of wireless video signals: analog and digital. Analog refers to an RF (Radio Frequency). Only FCC-approved RF video signals for consumers are 5.4GHz, 2.4GHz, and 900 MHz (obsolete). RF video signals can be interfered with by other wireless products in the same frequency, such as cordless phones and wireless routers. The level of interference varies depending on the proximity of the camera to the receiver and the interfering source. There may be no noticeable distortion in the video to slight ~ heavy horizontal lines in the video. On the other hand, digital wireless or Wi-Fi has no interference at all.
Can your pinhole Wi-Fi cameras be fitted with a different camera? For example, a super low light B/W CCD camera?
Sorry, since it is a digital system, the server module only accepts its own camera.
Can your Wi-Fi cameras handle multiple units over a single IP?
Yes, our Wi-Fi camera has its own server and automatic IP pointing. The included software allows up to 9 camera management (record, view, setup, etc.).
Can your Wi-Fi cameras record?
Yes, the surveillance software included in the system will allow you to record. Our Wi-Fi system allows you to install and record from the PC that is connected to the same local network and also from a remote location.
Can your Wi-Fi cameras be used portably with a battery?
Yes, you can battery power the Wi-Fi camera with http://www.spycameras.com/item,p-5dc10ar,5v-dc-wallet-sized-10a-rechargeable-battery.html for about 8 hours and move it around as long as you are within your wireless router's Wi-Fi range to the camera. However, for portable use, such as mystery shopping, you will need a steady internet connection from your mobile hotspot router. Please call us for more detail.
Does your Wi-Fi camera support WEP 64 or 128-bit encryption?
Yes, WEP 64/128 bit, WPA-PSK, WPA2-PSK are supported.
Does your wireless Wi-Fi covert camera have its own self-contained software?
Our Wi-Fi cameras have built-in software allowing you to configure it as a web-server without the need for a PC. Only a router and internet connection are required. It can be viewed from any computer.
How do you connect a Wi-Fi camera?
Our Wi-Fi IP Cameras send digital wireless video to a wireless router, so all you need is a wireless router. You can also connect with a network cable. Once the set-up is done, you can watch the camera from anywhere via the web.